Open Kitchen in a Single-Family Home
More living space through new floor plan design
Especially in terraced houses with narrow, elongated floor plans, well-thought-out kitchen design offers the opportunity to reorganize existing room layouts and significantly improve living comfort. In this Basel project, the initial plan was simply to replace a kitchen that was around 25 years old. The owners desired a functional renovation with high-quality materials and contemporary fixtures. However, the initial floor plan analysis revealed considerably greater potential. By removing an existing partition wall, the kitchen could be opened up to the living area, allowing for a complete reorganization of the ground floor. The result is an open-plan kitchen in a single-family home that now forms a central part of the living space and impresses with its materials and spatial design.
Project data | Description |
Project name | Open kitchen in a detached house – more living space through a new floor plan design |
Location | Basel, Switzerland |
Building type | terraced house |
Year of construction of building | approximately 2000 |
Building size | approx. 180 m² |
Renovation area | Ground floor, over 50 m² |
Project type | Kitchen renovation and floor plan optimization |
Client | Private |
Interior design | inbyko interior architecture GmbH, Basel |
Services | Floor plan design, kitchen design, material and color concept, lighting design, detailed planning, construction management |
Structural measures | Removal of a plasterboard partition wall, new kitchen installation, suspended ceiling, adaptation of building services |
Materialization | Oak veneer, ceramic worktops, existing ceramic tile flooring, warm grey tones |
Special feature | Opening up the kitchen to the living area, integrating existing riser zones and preserving the original flooring. |

Initial situation and challenges
Kitchen in a narrow terraced house
The terraced house is located in a larger residential development in Basel and was built around the year 2000. The building comprises approximately 180 square meters, of which over 50 square meters are on the ground floor. Typical for this type of building is its elongated, relatively narrow floor plan. Since the side facades abut neighboring buildings, natural daylight enters the house primarily through the two end facades. In the existing floor plan, the kitchen was located on the garden side. The dining and living areas were arranged on the opposite side, facing the street. Between these were circulation areas with the staircase to the upper floors and the basement. An additional partition wall separated the kitchen area from the rest of the living space. This made the kitchen feel cramped, while the central area of the ground floor benefited only from limited daylight. In addition to the desire for an open-plan kitchen with sufficient storage space for a larger family, the existing materials also needed to be considered. In particular, the existing gray ceramic tile flooring was to be retained. The exposed limestone walls, mineral surfaces, and high, white-painted ceilings gave the building a rather cool character. The aim was therefore to create more warmth and comfort without fundamentally altering the architectural identity of the house.

Technical limitations due to existing building services
A major challenge was the existing riser shafts for water and electrical installations. These were located within the kitchen area to be renovated and could not be easily relocated. At the same time, the new kitchen island needed to be equipped with additional connections that were not originally present at the intended location. The technical infrastructure therefore had to be considered during the design phase.

An open kitchen as the center of the living space
Our first step was not to focus solely on the existing kitchen, but to analyze the use of the entire ground floor.The central question was how to better integrate cooking, dining, and living without compromising the clarity of the narrow floor plan. The key measure was the complete removal of the existing drywall partition between the kitchen and living area. This created an open, continuous space that opened up new possibilities for the arrangement of the kitchen and dining area. The dining table could be moved closer to the center of the ground floor. At the same time, the kitchen gained in spaciousness and could be equipped with additional work and storage surfaces. The new spatial organization creates a logical flow between food preparation, eating, and living. It also improves the spatial connection between the garden and street sides.
The kitchen as an independent architectural element
A distinctive feature of the design lies in the creation of the kitchen area as a cohesive spatial unit. The existing ceiling height of over three meters allowed for the installation of a slightly suspended ceiling above the kitchen. This serves several functions: it defines the kitchen area within the open floor plan, provides space for the plumbing and electrical wiring, and enables the integration of targeted ambient lighting. The oak-veneered surfaces also create a visual connection to the new kitchen cabinets. This gives the kitchen its own distinct spatial identity without further separating it from the living area by walls.

Material concept – oak wood as a warm contrast to the existing structure
The choice of materials was deliberately developed from the existing architecture. The gray ceramic tile floor, the exposed sand-lime brick walls, and the mineral surfaces continued to form the basis of the design concept. To contrast these materials with a warm element, we opted for the targeted use of oak. Oak veneered surfaces characterize the tall cabinets, the kitchen island, and the new ceiling cladding. The consistent repetition of the same material creates a cohesive design in which individual elements do not appear isolated.
A kitchen island with a sculptural character
The kitchen island forms the centerpiece of the new kitchen area.
The custom-made carpentry construction was combined with a ceramic surface that extends down to the floor on one end.
This so-called waterfall design gives the island a clean, monolithic appearance. From the entrance or dining side, it appears as a single, cohesive form. The same material was also used for the worktops and backsplashes of the kitchen unit, creating a calm and unified material composition. The walls were painted a warm gray tone that complements the oak surfaces and simultaneously references the existing sand-lime brick walls. This understated design is a deliberate choice. The kitchen is intended to be high-quality and a striking feature, while also harmonizing with the architecture of the house over the long term.

Lighting design – more brightness in the open ground floor
In a terraced house with daylight coming from only two sides of the facade, artificial lighting becomes particularly important.
The original kitchen lacked suitable ceiling outlets to evenly illuminate the work surfaces. The new suspended ceiling made it possible to integrate the necessary wiring and tailor the lighting specifically to the kitchen's functions. Discreetly placed ceiling spotlights now provide functional lighting for the work areas without dominating the kitchen's overall appearance. A surface-mounted ceiling light was installed above the central dining area. It creates a visual focal point and illuminates the dining table. In the living area, a floor lamp complements the lighting concept and creates a more inviting atmosphere. These different lighting levels allow the kitchen, dining, and living areas to be illuminated according to their respective uses, even though they are spatially connected.
Important decisions – building technology and existing floor coverings
High-quality kitchen design requires not only a conceptual design but also precise technical detailing. Integrating the existing staircases into the new kitchen furniture proved particularly challenging.
These had to remain accessible. Therefore, corresponding access panels were provided in the back of the tall cabinets. This allowed the existing installations to be retained and simultaneously integrated aesthetically into the new kitchen front.
New water and wastewater connections for the kitchen island
The planned kitchen island required additional water and wastewater connections. Since these were not available in the desired location on the ground floor, the new access was developed via the basement. The pipes were routed through the basement ceiling to the kitchen island and connected to the existing installations. This solution enabled the desired kitchen layout without having to completely rebuild the existing floor structure.
Preserve and reuse existing ceramic tiles
The removal of the partition wall also presented a particular challenge. The wall stood directly on the subfloor. After its removal, some floor tiles were missing from the original wall position. Since the existing tiles were no longer available, we worked with the contractor to develop a solution for reusing the existing tiles. Individual floor tiles could be removed from the area under the new kitchen island, as this area would later be completely covered. The salvaged tiles were then reinstalled in place of the removed wall. This allowed us to largely preserve the existing flooring and create a visually seamless transition.

Implementation and collaboration – responding to unforeseen events
The project encompassed construction and demolition work, new electrical and plumbing installations, carpentry, and the adaptation of wall and ceiling surfaces. A key aspect of our work was coordinating the various specialist companies involved and continuously monitoring the interfaces between the different construction phases. Especially when converting existing buildings, it's impossible to fully anticipate all the specific circumstances beforehand.
Unexpected pipes in the ground structure
During core drilling, a pipe of the existing underfloor heating system was damaged. This necessitated a more extensive local opening of the floor and repair of the affected pipe. The work resulted in a slight delay in the construction schedule. Connecting the new plumbing to the existing drainpipes in the basement also required additional clarification, as the exact pipe routing only became visible after the relevant areas were opened. These situations illustrate why ongoing technical coordination is essential during renovations. Crucially, it is not only important that a project is carefully planned, but also that unexpected construction-related issues can be addressed professionally.
Result – an open kitchen in a detached house with a new quality of living
The renovation significantly transformed the spatial feel of the ground floor. The previously separate kitchen is now an integral part of the living area. The open floor plan creates a better connection between cooking, dining, and living, and allows for more generous movement and workspaces. The new arrangement of the kitchen furniture provides considerably more storage space and additional work surfaces. The combination of oak, ceramic surfaces, and warm gray tones simultaneously transforms the atmosphere of the entire ground floor. The suspended ceiling above the kitchen, in particular, contributes to the improved spatial quality. It enhances the proportions of the kitchen area, integrates the necessary lighting, and seamlessly connects with the built-in elements. The existing mineral surfaces are retained, but the new material concept lends them a much warmer feel. The kitchen now appears less like a traditional, functional space and more like a custom-made piece of furniture that forms an important part of the overall interior design.

Conclusion – improved living quality through a new floor plan design
This project demonstrates how a simple kitchen renovation can transform into a comprehensive interior design improvement. The key to success lay not just in the new kitchen itself, but in the early consideration of the existing floor plan. By removing a partition wall, reorganizing the living spaces, and carefully integrating materials, lighting, and building technology, the potential of the ground floor was significantly enhanced. The open-plan kitchen in the single-family home thus becomes a central element of a cohesive living concept. At the same time, the project shows that existing materials and building components do not necessarily need to be replaced. By strategically developing the existing structure, high-quality results can be achieved while preserving existing resources.
Findings from this project
1. A kitchen renovation should begin with a floor plan analysis. Even if the initial plan is simply to replace the existing kitchen, changes to the room layout can create significantly greater benefits.
2. Existing installations influence the design. Riser zones, water pipes and electrical connections must be included in the planning early on to ensure that technical and design requirements remain compatible.
3. A suspended ceiling can fulfill several functions. In this project, it combines cable management, lighting, room proportions, and material concept.
4. Preserving the existing structure requires creative, detailed planning. Reusing existing floor slabs enabled an economical and aesthetically pleasing solution.
5. High-quality carpentry can shape architecture. The kitchen was not merely planned as furniture, but developed as an essential component of the room design.
6. Coordinated planning reduces the risk of incorrect decisions. From the initial design and detailed planning to implementation, materials, equipment, connections, and trades involved must be coordinated.

Why this project is interesting for building owners
Many homeowners face the decision of renovating their kitchens after 20 or 25 years. Often, the initial thought is to maintain the existing layout and simply replace appliances, cabinet fronts, and countertops. This can be a sensible approach. However, before making such a decision, a fundamental review of the existing room concept is worthwhile. Especially in narrow terraced houses, even minor structural changes can significantly improve the use and perception of the rooms. This project demonstrates how removing a non-load-bearing partition wall and reorganizing the kitchen created more cohesive living space. The goal was not to initiate as many additional construction measures as possible. Rather, necessary investments in a new kitchen were used to simultaneously improve the floor plan, lighting, and overall living comfort. Professional interior design planning helps to identify such opportunities early on, examine different approaches, and incorporate technical challenges into the cost and schedule planning in a timely manner. Therefore, we recommend that homeowners conduct a floor plan and concept development phase even before receiving the first concrete kitchen quote. This creates a sound basis for decision-making, on which subsequent detailed planning and implementation can be built.


